pappabearbooks 400
400
Chapter 400 works together and becomes a subordinate!
The electric kiln in the workshop is running. It was originally just an ordinary earthen kiln. After modification, there is no need to manually ignite and control the flame temperature.
Just press twice on the outside meter to control the temperature inside.
With the temperature control machine, it is not only used to make pottery, but can also be used to synthesize high-tech plastic materials and organic resins, which are precious chemical raw materials.
Looking at the temperature on instrument three, the internal temperature is rising little by little.
Su Lei also enthusiastically introduced to the people present: "The modified machine is equipped with the latest temperature control motherboard from abroad. It will control the temperature by controlling the amount of oxygen and the fuel contact area."
At this time, the temperature on the meter shows 1315 degrees.
The values move up and down, making it look more professional.
During the porcelain firing process, it is not easy to control the temperature at around 1300 degrees.
However, if the appropriate temperature is maintained, the surface area of the blank can be reduced and the porosity can be reduced, thereby increasing its mechanical properties.
Lin Ran and Wei Chengbin were watching silently, but they were thinking about different issues.
Li Yuanhao patted the disappointed Wei Chengbin on the shoulder: "Su Lei is a professional engineer."
"If the temperature can really be controlled, then he is really amazing." Wei Chengbin was not convinced just now, but looked at the temperature above.
In the past, the failure rate of porcelain firing in workshops was high because of improper temperature control.
If the temperature is too high, the paint will spread easily, and the burned handicrafts will feel cheap.
If the temperature is too low, it will be difficult to shape, and weird-shaped crafts will often be produced.
If the temperature can be controlled reasonably, the yield can be greatly improved.
Lin Ran thought to himself that it seemed like Su Lei had transformed the kiln like magic.
In fact, he just installed a foreign electronic motherboard, which is equivalent to DIYing an electric kiln.
The core technology is still foreign motherboard.
This incident made him full of emotions. You must know that it is the early 80s, and China's industry has just started. Whether it is motherboards or chips, they are inseparable from foreign designs.
We are indeed lagging behind a lot in terms of science and technology. No wonder many people are flocking to foreign countries.
In this era, Oumi's technology is indeed superior to that of China.
Make good use of foreign technology, improve the production of handicrafts, and then sell them back.
An hour passed. During the process, Su Lei continued to adjust the power of the electric kiln based on the temperature measuring agent to maintain the temperature and pressure in the kiln.
Even Wei Chengbin was a little impressed. Su Lei had obviously investigated the information, and the temperature he controlled was exactly the same as Wei Chengbin's idea.
This is definitely not only knowledge, but also shows that he has sufficient experience.
Lin Ran also observed secretly from the side and nodded casually.
As expected of a college student in today's era, both theoretical and practical levels are very high.
Finally, the porcelain firing work is coming to an end.
The first batch of porcelain made of new materials will be released soon.
Su Lei looked at the time on the board, became energetic, and said slightly excitedly: "Everyone, wait a moment, we are getting ready to start the furnace."
Everyone around him took a few steps back.
Because the temperature of the electric kiln at this time is above 1000 degrees, the things burned will probably be red.
Su Lei was also a little nervous. He was about to open the electric kiln door, but Wei Chengbin beat him to it.
"I'll turn on the stove. You stand back." Wei Chengbin knew that the work of turning on the stove was very dangerous. If it was left to a novice, he would probably get burned.
Su Lei accepted his opinion and stepped back.
He said to Wei Chengbin: "You can just press the door opening button below. Unfortunately, I don't have any way to get the cooling equipment, otherwise I can cool down directly in the furnace."
Wei Chengbin hesitated slightly and pressed the door button.
After he pressed the button, the furnace door slowly opened.
This startled him, and he immediately took two steps back to prevent himself from being burned by the steam that came out when he turned on the furnace.
When the door was fully opened, the fired ceramic pieces appeared inside.
Because it was a test, we did not make complicated crafts, but directly made a single ceramic piece.
"It looks fine from the outside." Wei Chengbin is also a professional. He just took a look at the ceramic piece from a distance and knew that it was no different from ordinary ceramics made of black soil.
It's just not clear internally.
Lin Ran believed in Su Lei's ability and now wanted to discuss the salary issue with him.
So, Su Lei, Wei Chengbin, and Li Yuanhao were called to the temporary office, so that the craftsmen could continue their work.
"Mr. Su, the skills you demonstrated impressed me. I hope you can join our team." Lin Ran took the initiative to shake hands with him.
The store is important, but without a factory that provides products, it is just an empty shelf.
With Su Lei, their production efficiency will rise to a higher level.
Su Lei raised his hand and said, "It's just a small skill. Li Yuanhao is my junior high school classmate. It would be an honor for me to work with him."
"Leizi is good at talking." Li Yuanhao smiled, "How about it? Mr. Lin, the talent I recommended is pretty good, right?"
"Not bad. I plan to assign the work to the three of you next." Lin Ran had previously wanted Wei Chengbin to focus on the research of new handicrafts. After all, there are still many imitations of cultural relics that need to be studied in detail.
Previously, Wei Chengbin had been busy leading the work of craftsmen and training new people, so it was inevitable that he would be overwhelmed.
Now that Su Lei is here, the production work can be completely handed over to him.
As for Li Yuanhao, he is still writing calligraphy and painting alone. The next task is for him to find a way to produce energy.
"I'll recommend someone to you. You can chat with him." Lin Ran told him Liu Jingfeng's number.
As a master of calligraphy and painting in Yanziwu Hutong, he must also know the engineering method of calligraphy and painting.
In this regard, Li Yuanhao is the expert, and Lin Ran will not mess with it.
If you need funds, he will provide them. If you need to hire people, you can discuss it with Yang Jianlong.
The factory matters were arranged properly, and Wei Chengbin had no objection.
He was never a person who was greedy for fame and fortune, but now he can focus on research, which is a dream.
"Okay, since everyone has no objections, let's continue operating like this." Lin Ran clenched his fists and was very optimistic about the future of the factory.
After they discussed the matter and came to the workshop, the ceramic pieces had completely cooled down.
Looking at the cross-section structure of the ceramic, Wei Chengbin's eyes widened, and he seemed a little speechless when he held it in front of Lin Ran.
"Mr. Lin, look at the interior of this ceramic, there is no honeycomb structure at all!"